/*--------------------------------------------------------------------------*/
/* PWM0 CH0CH1 Configuration                                                */
/*--------------------------------------------------------------------------*/

<!clock: {"ALL" : "PWM0" }; !>
<!pin:   {"UsePWM0CH0ENCapBoolean" : {"1" : ["PWM0_CH0"]} ,
		  "UsePWM0CH1ENCapBoolean" : {"1" : ["PWM0_CH1"]} ,
		  "UsePWM0CH0ENBoolean" : {"1" : ["PWM0_CH0"]} ,
		  "UsePWM0CH1ENBoolean" : {"1" : ["PWM0_CH1"]} }; !>

#define NUCODEGEN_PWM0_CH0_1_FUNC_SEL						(<!id:PWM0CH01FuncSelect;
															type:radio;
															label:Select PWM0 CH0 and CH1 function;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[PWM output waveform, PWM capture];
															dependencies:none;
															dependenciesOption:none;!>)

#define NUCODEGEN_PWM0_CH0_1_CAP_UNITTIME					(<!id:PWM0CH01CapUnitTimeInterger;
															type:integer;
															label:The unit time of counter(ns). ;
															data:1000;
															default:1000;
															helper: It is limited by clock source.;
															minimum:10;
															maximum:85000;
															dependencies:UsePWM0CH0ENCapBoolean|UsePWM0CH1ENCapBoolean;
															dependenciesOption:{"UsePWM0CH0ENCapBoolean":"1","UsePWM0CH1ENCapBoolean":"1"};
															groupId:GroupPWM0Cap01;
															groupName:PWM0 CH0 & CH1 common Capture Configuration;!>)

#define NUCODEGEN_PWM0_CH0_1_CAP_PDMA_ENABLE    			(<!id:UsePWM0CH01PDMAENCapBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 and CH1 capture with PDMA function;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceCapBoolean|UsePWM0CH1AdvanceCapBoolean;
															dependenciesOption:{"UsePWM0CH0AdvanceCapBoolean":"1","UsePWM0CH1AdvanceCapBoolean":"1"};
															groupId:GroupPWM0Cap01;!>)

#define NUCODEGEN_PWM0_CH0_1_CAP_PDMA_CH_SEL				(<!id:UsePWM0CH01CapPDMACHSel;
															type:radio;
															label:Select PWM0 CH0 capture data or CH1 to PDMA.;
															size:5;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[CH0, CH1];
															dependencies:[UsePWM0CH01PDMAENCapBoolean, UsePWM0CH0AdvanceCapBoolean, UsePWM0CH1AdvanceCapBoolean];
															dependenciesOption:{"UsePWM0CH01PDMAENCapBoolean":"1","UsePWM0CH0AdvanceCapBoolean":"1","UsePWM0CH1AdvanceCapBoolean":"1"};
															groupId:GroupPWM0Cap01;!>)

#define NUCODEGEN_PWM0_CH0_1_CAP_PDMA_DATA_SEL 	            (<!id:UsePWM0CH0CapPDMADataSel;
															type:select;
															label:Select Rising or Falling Capture Data to PDMA.;
															size:5;
															data:PWM_CAPTURE_PDMA_RISING_LATCH;
															default:PWM_CAPTURE_PDMA_RISING_LATCH;
															enum:[PWM_CAPTURE_PDMA_RISING_LATCH, PWM_CAPTURE_PDMA_FALLING_LATCH, PWM_CAPTURE_PDMA_RISING_FALLING_LATCH];
															optionLabels:[Rising Capture Data, Falling Capture Data, Rising and Falling Capture Data] ;
															dependencies:UsePWM0CH01PDMAENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap01;!>)

#define NUCODEGEN_PWM0_CH0_1_CAP_PDMA_FIRST_SEL 	        (<!id:UsePWM0CH0CapPDMAFirstSel;
															type:select;
															label: Select the capture order is rising or falling first.;
															size:5;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[Falling, Rising] ;
															dependencies:UsePWM0CH01PDMAENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap01;!>)

#define NUCODEGEN_PWM0_CH0_CAP_ENABLE                       (<!id:UsePWM0CH0ENCapBoolean;
															type:checkbox;
															label:Enable PWM0 CH0;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01FuncSelect;
															dependenciesOption:1;
															groupId:GroupPWM0Cap0;
															groupName:PWM0 CH0 Capture Configuration;!>)

#define NUCODEGEN_PWM0_CH0_CAP_ADVANCED                     (<!id:UsePWM0CH0AdvanceCapBoolean;
															type:checkbox;
															label:Advanced configuration;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0ENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap0;!>)

#define NUCODEGEN_PWM0_CH0_CAP_RELOAD                       (<!id:UsePWM0CH0CapReloadMultiselect;
															type:select;
															label:Select CH0 reload mode;
															size:5;
															data:PWM_CAPTURE_INT_RISING_LATCH;
															default:PWM_CAPTURE_INT_RISING_LATCH;
															enum:[PWM_CAPTURE_INT_RISING_LATCH , PWM_CAPTURE_INT_FALLING_LATCH, PWM_CAPTURE_INT_RISING_LATCH|PWM_CAPTURE_INT_FALLING_LATCH];
															optionLabels:[Rising reload, Falling reload, Rising and falling reload];
															dependencies:UsePWM0CH0ENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap0;!>)

#define NUCODEGEN_PWM0_CH0_CAP_INT_SEL		  				(<!id:PWM0CH0CapINTSelect;
															type:select;
															label:Select PWM0 CH0 capture interrupt ;
															data:0;
															default:0;
															enum:[0, 1, 2, 3];
															optionLabels:[Disable, Rising latch, Falling latch, Rising and falling latch];
															dependencies:UsePWM0CH0AdvanceCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap0;!>)

#define NUCODEGEN_PWM0_CH0_CAP_INV      					(<!id:PWM0CH0ENCapInverter;
															type:checkbox;
															label:Enable PWM0 CH0 Capture source inverter;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap0;!>)

#define NUCODEGEN_PWM0_CH1_CAP_ENABLE         				(<!id:UsePWM0CH1ENCapBoolean;
															type:checkbox;
															label:Enable PWM0 CH1;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01FuncSelect;
															dependenciesOption:1;
															groupId:GroupPWM0Cap1;
															groupName:PWM0 CH1 Capture Configuration;!>)

#define NUCODEGEN_PWM0_CH1_CAP_ADVANCED       			    (<!id:UsePWM0CH1AdvanceCapBoolean;
															type:checkbox;
															label:Advanced configuration;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH1ENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap1;!>)

#define NUCODEGEN_PWM0_CH1_CAP_RELOAD          				(<!id:UsePWM0CH1CapReloadMultiselect;
															type:select;
															label:Select CH1 reload mode;
															size:5;
															data:PWM_CAPTURE_INT_RISING_LATCH;
															default:PWM_CAPTURE_INT_RISING_LATCH;
															enum:[PWM_CAPTURE_INT_RISING_LATCH , PWM_CAPTURE_INT_FALLING_LATCH, PWM_CAPTURE_INT_RISING_LATCH|PWM_CAPTURE_INT_FALLING_LATCH];
															optionLabels:[Rising reload, Falling reload, Rising and falling reload];
															dependencies:UsePWM0CH1ENCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap1;!>)

#define NUCODEGEN_PWM0_CH1_CAP_INT_SEL		  				(<!id:PWM0CH1CapINTSelect;
															type:select;
															label:Select PWM0 CH1 capture interrupt ;
															data:0;
															default:0;
															enum:[0, 1, 2, 3];
															optionLabels:[Disable, Rising latch, Falling latch, Rising and falling latch];
															dependencies:UsePWM0CH1AdvanceCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap1;!>)

#define NUCODEGEN_PWM0_CH1_CAP_INV      					(<!id:PWM0CH1ENCapInverter;
															type:checkbox;
															label:Enable PWM0 CH1 Capture source inverter;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH1AdvanceCapBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Cap1;!>)

#define NUCODEGEN_PWM0_CH0_1_OUTPUT_FUNC_SETMODE	  		(<!id:PWM0CH01OutputFuncSetmode;
															type:radio;
															label:Select PWM0 CH0 and CH1 output function setting;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[Quick setting, Manual];
															dependencies:UsePWM0CH0ENBoolean|UsePWM0CH1ENBoolean;
															dependenciesOption:{"UsePWM0CH0ENBoolean":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output01;
															groupName:PWM0 CH0 & CH1 Common Output Configuration;!>)

#define NUCODEGEN_PWM0_CH0_1_FREQ			  				(<!id:PWM0CH01FREQInteger;
															type:integer;
															label:The PWM0 CH0 and CH1 frequency(Hz);
															data:1000;
															default:1000;
															helper:Enter frequency between 1~PCLK or 1~PLL_CLK;
															minimum:1;
															maximum:24000000;
															dependencies:PWM0CH01OutputFuncSetmode&(UsePWM0CH0ENBoolean|UsePWM0CH1ENBoolean);
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"0","UsePWM0CH0ENBoolean":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_CLKSRC			  			    (<!id:PWM0CH01CLKSRCSelect;
															type:select;
															label:Select PWM0 CH0 and CH1 clock source;
															data:PWM_CLKSRC_PWM_CLK;
															default:PWM_CLKSRC_PWM_CLK;
															enum:[PWM_CLKSRC_PWM_CLK, PWM_CLKSRC_TIMER0, PWM_CLKSRC_TIMER1, PWM_CLKSRC_TIMER2, PWM_CLKSRC_TIMER3];
															optionLabels:[PWM0 CLK, TIMER0, TIMER1, TIMER2, TIMER3];
															dependencies:PWM0CH01OutputFuncSetmode&(UsePWM0CH0ENBoolean|UsePWM0CH1ENBoolean);
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_CNTTYPE		  				(<!id:PWM0CH01CNTTypeSelect;
															type:radio;
															label:Select PWM0 CH0 and CH1 counter type;
															data:PWM_UP_COUNTER;
															default:PWM_UP_COUNTER;
															enum:[PWM_UP_COUNTER, PWM_DOWN_COUNTER, PWM_UP_DOWN_COUNTER];
															optionLabels:[Up count, Down count, Up down count];
															dependencies:PWM0CH01OutputFuncSetmode&(UsePWM0CH0ENBoolean|UsePWM0CH1ENBoolean);
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_PRESCALER		  				(<!id:PWM0CH01PrescalerInteger;
															type:integer;
															label:The PWM0 CH0 and CH1 counter clock prescaler;
															data:10;
															default:10;
															helper:Enter prescaler between 0x0 ~ 0xFFF;
															minimum:0;
															maximum:4095;
															dependencies:PWM0CH01OutputFuncSetmode&(UsePWM0CH0ENBoolean|UsePWM0CH1ENBoolean);
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_PERIOD			  				(<!id:PWM0CH01PeriodInteger;
															type:integer;
															label:The PWM0 CH0 and CH1 period;
															data:1000;
															default:1000;
															helper:Enter period between 0x0 ~ 0xFFFF;
															minimum:0;
															maximum:65535;
															dependencies:PWM0CH01OutputFuncSetmode;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_SYNCSTART_ENABLE				(<!id:UsePWM0CH01SyncStartENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 and CH1 synchronous start function.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceBoolean&UsePWM0CH1AdvanceBoolean;
															dependenciesOption:{"UsePWM0CH0AdvanceBoolean":"1","UsePWM0CH1AdvanceBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_SYNCSTART_SRC					(<!id:UsePWM0CH01SyncStartSrcSelect;
															type:radio;
															label:Select PWM0 CH0 and CH1 synchronous start source;
															data:PWM_SSCTL_SSRC_PWM0;
															default:PWM_SSCTL_SSRC_PWM0;
															helper:PWM0 only has one source controller, its setting must be the same with other;
															enum:[PWM_SSCTL_SSRC_PWM0, PWM_SSCTL_SSRC_PWM1];
															optionLabels:[PWM0, PWM1];
															dependencies:UsePWM0CH01SyncStartENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_COMPLEMENTARY_ENABLE			(<!id:UsePWM0CH01ComplementaryENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 and CH1 complementary function.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceBoolean&UsePWM0CH1AdvanceBoolean;
															dependenciesOption:{"UsePWM0CH0AdvanceBoolean":"1","UsePWM0CH1AdvanceBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_DEADTIME_ENABLE				(<!id:UsePWM0CH01DeadtimeENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 and CH1 dead time function.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH01ComplementaryENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_DEADTIME_CNT					(<!id:PWM0CH01DeadtimeCNTInteger;
															type:integer;
															label:The PWM0 CH0 and CH1 dead time counter.;
															data:10;
															default:10;
															helper:Enter dead time counter between 0x0 ~ 0xFFF.;
															minimum:0;
															maximum:4095;
															dependencies:UsePWM0CH01DeadtimeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_DEADTIME_CLKSRC				(<!id:PWM0CH01DeadtimeCLKSRCSelect;
															type:radio;
															label:Select PWM0 CH0 and CH1 dead time clock source;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[PWM0_CLK, Prescaler];
															dependencies:UsePWM0CH01DeadtimeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_ENABLE     				(<!id:UsePWM0CH01BrakeENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 and CH1 brake function.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceBoolean&UsePWM0CH1AdvanceBoolean;
															dependenciesOption:{"UsePWM0CH0AdvanceBoolean":"1","UsePWM0CH1AdvanceBoolean":"1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_SRC						<!id:PWM0CH01BrakeSRCMultiselect;
															type:multipleselect;
															label:Select PWM0 CH0 and CH1 brake source ;
															data:PWM_FB_EDGE_BKP0;
															default:PWM_FB_EDGE_BKP0;
															enum:[PWM_FB_EDGE_BKP0, PWM_FB_EDGE_BKP1, PWM_FB_EDGE_ACMP0,
															      PWM_FB_EDGE_ACMP1, 0x180, 0x280,
																  0x880];
															optionLabels:[Brake pin 0, Brake pin 1, ACMP0 output,
																		  ACMP1 output, Clock Security System detection, BOD detection, Core lockup detection];
															dependencies:UsePWM0CH01BrakeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>

#define NUCODEGEN_PWM0_CH0_1_BRAKE_DETECT_TYPE				(<!id:PWM0CH01BrakedetecttypeSelect;
															type:radio;
															label:Select PWM0 CH0 and CH1 brake detect type.;
															data:PWM_FB_EDGE;
															default:PWM_FB_EDGE;
															enum:[PWM_FB_EDGE, PWM_FB_LEVEL];
															optionLabels:[Edge detection, Level detection];
															dependencies:UsePWM0CH01BrakeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_FILTER_ENABLE			(<!id:PWM0CH01BrakefiltetEnBoolen;
															type:checkbox;
															label:Enable PWM0 Brake pin noise filter. ;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															helper:PWM0 only has one filter, its setting must be the same with other;
															dependencies:PWM0CH01BrakeSRCMultiselect;
															dependenciesOption:{"PWM0CH01BrakeSRCMultiselect":"PWM_FB_EDGE_BKP0|PWM_FB_EDGE_BKP1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_FILTER_CLK				(<!id:PWM0CH01BrakefilterCLKSelect;
															type:select;
															label:Select PWM0 brake pin filter clock. ;
															data:PWM_NF_CLK_DIV_1;
															default:PWM_NF_CLK_DIV_1;
															enum:[PWM_NF_CLK_DIV_1, PWM_NF_CLK_DIV_2, PWM_NF_CLK_DIV_4, PWM_NF_CLK_DIV_8, PWM_NF_CLK_DIV_16, PWM_NF_CLK_DIV_32, PWM_NF_CLK_DIV_64, PWM_NF_CLK_DIV_128];
															optionLabels:[HCLK, HCLK/2, HCLK/4, HCLK/8, HCLK/16, HCLK/32, HCLK/64, HCLK/128];
															dependencies:PWM0CH01BrakefiltetEnBoolen;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_FILTER_CNT				(<!id:PWM0CH01BrakefilterCNTINT;
															type:integer;
															label:The PWM0 brake pin detector filter count;
															data:0;
															default:0;
															helper:Enter the filter count between 0x0~0x7.;
															minimum:0;
															maximum:7;
															dependencies:PWM0CH01BrakefiltetEnBoolen;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_1_BRAKE_PIN_INV					(<!id:PWM0CH01BrakepininvEn;
															type:checkbox;
															label:Enable PWM0 Brake pin inverter.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01BrakeSRCMultiselect;
															dependenciesOption:{"PWM0CH01BrakeSRCMultiselect":"PWM_FB_EDGE_BKP0|PWM_FB_EDGE_BKP1"};
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_BRAKE_ACTION					    (<!id:PWM0CH0BrakeActionSelect;
															type:select;
															label:Select PWM0 CH0 action when brake happen. ;
															data:0;
															default:0;
															enum:[0, 1, 2, 3];
															optionLabels:[Nothing, Tri-State, Low level, High level];
															dependencies:UsePWM0CH01BrakeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH1_BRAKE_ACTION					    (<!id:PWM0CH1BrakeActionSelect;
															type:select;
															label:Select PWM0 CH1 action when brake happen. ;
															data:0;
															default:0;
															enum:[0, 1, 2, 3];
															optionLabels:[Nothing, Tri-State, Low level, High level];
															dependencies:UsePWM0CH01BrakeENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output01;!>)

#define NUCODEGEN_PWM0_CH0_ENABLE           				(<!id:UsePWM0CH0ENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01FuncSelect;
															dependenciesOption:0;
															groupId:GroupPWM0Output0;
															groupName:PWM0 CH0 Output Configuration;!>)

#define NUCODEGEN_PWM0_CH0_ADVANCED         				(<!id:UsePWM0CH0AdvanceBoolean;
															type:checkbox;
															label:Advanced configuration;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01OutputFuncSetmode&UsePWM0CH0ENBoolean;
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_DUTY								(<!id:PWM0CH0DUTYInteger;
															type:integer;
															label:The PWM0 CH0 duty cycle(%);
															data:10;
															default:10;
															helper:Enter duty cycle(0~100%).;
															minimum:0;
															maximum:100;
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"0","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_CMPDATA							(<!id:PWM0CH0CmpdataInteger;
															type:integer;
															label:The PWM0 CH0 comparator ;
															data:1000;
															default:1000;
															helper:Enter comparator between 0x0 ~ 0xFFFF;
															minimum:0;
															maximum:65535;
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_WAVEOUT_PERIOD					(<!id:PWM0CH0WaveOutPeriodSelect;
															type:radio;
															label:The PWM0 CH0 period point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_WAVEOUT_ZERO						(<!id:PWM0CH0WaveOutZeroSelect;
															type:radio;
															label:The PWM0 CH0 zero point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_WAVEOUT_CMPUP					(<!id:PWM0CH0WaveOutCmpUpSelect;
															type:radio;
															label:The PWM0 CH0 compare up point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01CNTTypeSelect, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01CNTTypeSelect":"PWM_UP_COUNTER|PWM_UP_DOWN_COUNTER","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_WAVEOUT_CMPDOWN					(<!id:PWM0CH0WaveOutCmpDownSelect;
															type:radio;
															label:The PWM0 CH0 compare down point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01CNTTypeSelect, UsePWM0CH0ENBoolean];
															dependenciesOption:{"PWM0CH01CNTTypeSelect":"PWM_DOWN_COUNTER|PWM_UP_DOWN_COUNTER","UsePWM0CH0ENBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_LOAD_MODE						(<!id:PWM0CH0LoadModeSelect;
															type:radio;
															label:Select PWM0 CH0 loading mode ;
															data:0;
															default:0;
															enum:[0, 1, 2];
															optionLabels:[Period mode, Immediate mode, Center mode];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH0AdvanceBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH0AdvanceBoolean":"1"};
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_OTHER_OUTPUT						(<!id:PWM0CH0otherOutputSelect;
															type:radio;
															label:The PWM0 CH0 other output behavior ;
															data:0;
															default:0;
															enum:[0, 1, 2];
															optionLabels:[Disable, Mask, Inverter];
															dependencies:UsePWM0CH0AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_MASK_DATA						(<!id:PWM0CH0MaskDataSelect;
															type:radio;
															label:The PWM0 CH0 mask data ;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[Low, High];
															dependencies:PWM0CH0otherOutputSelect;
															dependenciesOption:1;
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_TRIGER_EADC_ENABLE   			(<!id:UsePWM0CH0TrigerEADCENBoolean;
															type:checkbox;
															label:Enable PWM0 CH0 trigger EADC.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH0AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_TRIGER_EADCSRC					(<!id:UsePWM0CH0TrigerEADCSrcSelect;
															type:select;
															label:Select condition to trigger EADC;
															data:PWM_TRIGGER_ADC_EVEN_ZERO_POINT;
															default:PWM_TRIGGER_ADC_EVEN_ZERO_POINT;
															enum:[PWM_TRIGGER_ADC_EVEN_ZERO_POINT, PWM_TRIGGER_ADC_EVEN_PERIOD_POINT, PWM_TRIGGER_ADC_EVEN_ZERO_OR_PERIOD_POINT, PWM_TRIGGER_ADC_EVEN_CMP_UP_COUNT_POINT, PWM_TRIGGER_ADC_EVEN_CMP_DOWN_COUNT_POINT, PWM_TRIGGER_ADC_ODD_CMP_UP_COUNT_POINT, PWM_TRIGGER_ADC_ODD_CMP_DOWN_COUNT_POINT];
															optionLabels:[CH0 zero point, CH0 period , CH0 zero or period point, CH0 up count CMPDAT point, CH0 down count CMPDAT point, CH1 up count CMPDAT point, CH1 down count CMPDAT point];
															vertical:false;
															dependencies:UsePWM0CH0TrigerEADCENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output0;!>)

#define NUCODEGEN_PWM0_CH0_INT_SEL							<!id:PWM0CH0INTSelect;
															type:multipleselect;
															label:Select PWM0 CH0 interrupt ;
															data:0;
															default:0;
															enum:[1, 2, 4, 8, 16];
															optionLabels:[Zero, Period, Cmpup, Cmpdown, Brake];
															dependencies:UsePWM0CH0AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output0;!>

#define NUCODEGEN_PWM0_CH1_ENABLE       			        (<!id:UsePWM0CH1ENBoolean;
															type:checkbox;
															label:Enable PWM0 CH1.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:PWM0CH01FuncSelect;
															dependenciesOption:0;
															groupId:GroupPWM0Output1;
															groupName:PWM0 CH1 Output Configuration;!>)

#define NUCODEGEN_PWM0_CH1_ADVANCED     			        (<!id:UsePWM0CH1AdvanceBoolean;
															type:checkbox;
															label:Advanced configuration;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:[PWM0CH01OutputFuncSetmode,UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_DUTY							    (<!id:PWM0CH1DUTYInteger;
															type:integer;
															label:The PWM0 CH1 duty cycle(%);
															data:10;
															default:10;
															helper:Enter duty cycle(0~100%).;
															minimum:0;
															maximum:100;
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"0","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_CMPDATA						    (<!id:PWM0CH1CmpdataInteger;
															type:integer;
															label:The PWM0 CH1 comparator ;
															data:1000;
															default:1000;
															helper:Enter comparator between 0x0 ~ 0xFFFF;
															minimum:0;
															maximum:65535;
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_WAVEOUT_PERIOD					(<!id:PWM0CH1WaveOutPeriodSelect;
															type:radio;
															label:The PWM0 CH1 period point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_WAVEOUT_ZERO					    (<!id:PWM0CH1WaveOutZeroSelect;
															type:radio;
															label:The PWM0 CH1 zero point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_WAVEOUT_CMPUP					(<!id:PWM0CH1WaveOutCmpUpSelect;
															type:radio;
															label:The PWM0 CH1 compare up point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01CNTTypeSelect, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01CNTTypeSelect":"PWM_UP_COUNTER|PWM_UP_DOWN_COUNTER","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_WAVEOUT_CMPDOWN					(<!id:PWM0CH1WaveOutCmpDownSelect;
															type:radio;
															label:The PWM0 CH1 compare down point output behavior ;
															data:PWM_OUTPUT_NOTHING;
															default:PWM_OUTPUT_NOTHING;
															enum:[PWM_OUTPUT_NOTHING, PWM_OUTPUT_LOW, PWM_OUTPUT_HIGH, PWM_OUTPUT_TOGGLE];
															optionLabels:[Nothing, Low, High, Toggle];
															dependencies:[PWM0CH01CNTTypeSelect, UsePWM0CH1ENBoolean];
															dependenciesOption:{"PWM0CH01CNTTypeSelect":"PWM_DOWN_COUNTER|PWM_UP_DOWN_COUNTER","UsePWM0CH1ENBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_LOAD_MODE						(<!id:PWM0CH1LoadModeSelect;
															type:radio;
															label:Select PWM0 CH1 loading mode ;
															data:0;
															default:0;
															enum:[0, 1, 2];
															optionLabels:[Period mode, Immediate mode, Center mode];
															dependencies:[PWM0CH01OutputFuncSetmode, UsePWM0CH1AdvanceBoolean];
															dependenciesOption:{"PWM0CH01OutputFuncSetmode":"1","UsePWM0CH1AdvanceBoolean":"1"};
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_OTHER_OUTPUT						(<!id:PWM0CH1otherOutputSelect;
															type:radio;
															label:The PWM0 CH1 other output behavior ;
															data:0;
															default:0;
															enum:[0, 1, 2];
															optionLabels:[Disable, Mask, Inverter];
															dependencies:UsePWM0CH1AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_MASK_DATA						(<!id:PWM0CH1MaskDataSelect;
															type:radio;
															label:The PWM0 CH1 mask data ;
															data:0;
															default:0;
															enum:[0, 1];
															optionLabels:[Low, High];
															dependencies:PWM0CH1otherOutputSelect;
															dependenciesOption:1;
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_TRIGER_EADC_ENABLE   			(<!id:UsePWM0CH1TrigerEADCENBoolean;
															type:checkbox;
															label:Enable PWM0 CH1 trigger EADC.;
															data:0;
															default:0;
															enum:[1];
															optionLabels:[<br>];
															dependencies:UsePWM0CH1AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_TRIGER_EADCSRC					(<!id:UsePWM0CH1TrigerEADCSrcSelect;
															type:select;
															label:Select condition to trigger EADC;
															data:PWM_TRIGGER_ADC_EVEN_ZERO_POINT;
															default:PWM_TRIGGER_ADC_EVEN_ZERO_POINT;
															enum:[PWM_TRIGGER_ADC_EVEN_ZERO_POINT, PWM_TRIGGER_ADC_EVEN_PERIOD_POINT, PWM_TRIGGER_ADC_EVEN_ZERO_OR_PERIOD_POINT, PWM_TRIGGER_ADC_EVEN_CMP_UP_COUNT_POINT, PWM_TRIGGER_ADC_EVEN_CMP_DOWN_COUNT_POINT, PWM_TRIGGER_ADC_ODD_CMP_UP_COUNT_POINT, PWM_TRIGGER_ADC_ODD_CMP_DOWN_COUNT_POINT];
															optionLabels:[CH0 zero point, CH0 period , CH0 zero or period point, CH0 up count CMPDAT point, CH0 down count CMPDAT point, CH1 up count CMPDAT point, CH1 down count CMPDAT point];
															vertical:false;
															dependencies:UsePWM0CH1TrigerEADCENBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output1;!>)

#define NUCODEGEN_PWM0_CH1_INT_SEL							<!id:PWM0CH1INTSelect;
															type:multipleselect;
															label:Select PWM0 CH1 interrupt ;
															data:0;
															default:0;
															enum:[1, 2, 4, 8, 16];
															optionLabels:[Zero, Period, Cmpup, Cmpdown, Brake];
															dependencies:UsePWM0CH1AdvanceBoolean;
															dependenciesOption:1;
															groupId:GroupPWM0Output1;!>
