FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
Products
Applications
Function
+
FAQ
When using the Nano112 to drive the LCD, what happens if the pin that is not used to drive the LCD is also configured as the LCD function? Issue Date：2018-11-26
When using the Nano112 to drive the LCD, if other pins are also configured as the LCD function, the pins connected to the LCD will be affected and the LCD drive waveform output may be abnormal, resulting in blurred display. Therefore, pins that are not connected to the LCD should not be configured as the LCD function.
| Products: | Microcontrollers ,Arm Cortex-M0 MCUs ,Nano100/102 Base Series ,Nano110/112 LCD Series |
|---|---|
| Applications: | |
| Function: | Peripherals,I/O,GPIO |