FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
Products
Applications
Function
+
FAQ
What should user do if the WDT (Watchdog Timer) Reset of the NUC505 does not work properly? Issue Date：2018-11-28
When the WDT Reset occurs in the NUC505, the hardware mechanism of the WDT will pull the voltage of reset pin low to trigger reset; if the voltage of the Reset pin cannot be pulled low, the reset will not be triggered normally, and a hardfault may occur. Therefore, it is necessary to modify the circuit design. Refer to the design of the NUC505 development board for the circuit of the reset pin using the pull-up resistance value of 1kΩ, as shown in the following circuit diagram.
| Products: | Microcontrollers ,Arm Cortex-M4 MCUs ,NUC505 Series |
|---|---|
| Applications: | |
| Function: | Peripherals,Power Detection,Power-On Reset (POR),Low Voltage Reset (LVR),System Operation,Reset,Timer and PWM,Watchdog Timer (WDT) |