Automotive Data Logger

The automotive data logger consists of NuMicro® NUC131 microcontroller and N9H30 microprocessor. NUC131 supports CAN Bus to log On-Board Diagnostics-II (OBD-II) data, which includes vehicle speed, engine RPM, engine coolant temperature, intake air temperature, MAF air flow rate and throttle position from engine control unit (ECU) simulator. Then NUC131 converts the OBD-II raw data and transmits the above information to N9H30. N9H30 shows the received information on 7” TFT-LCD human machine interface enhanced by emWin.

  • Features
    Supports ISO 15765-4 CAN
    -
    Extendable other standards
     
    - SAE J1850 PWM/ VPW
      - SAE J1939 CAN
      - ISO 9141-2
      - ISO 14230-4 KWP
    - Supports HMI enhanced by emWin
  • Specifications
    NUC131 (32-bit Arm® Cortex®-M0)
    - AEC-Q100 qualified
    - Supports CAN protocol version 2.0 part A/B and bit rate up to 1 Mbit/s
    - Supports up to 6-set UART with LIN and RS485 function
    - Supports 24-channel PWM outputs with a max clock frequency of 100 MHz
    Supports high noise immunity: ESD HBM 8 kV and EFT 4.4 kV
    - Supports a wide operating voltage from 2.5V to 5.5V
  • System Block Diagram
    Automotive Data Logger-EN