Deepal Mehta Sr. Director, Business Development, InnoPhase IoT, Inc. Cloud Connected Ultra Low-Power Battery Operated IOT Sensors Sensors in the smart home and industrial automation applications need to be enabled with on device AI/ML capability while wirelessly connected and managed from the Cloud. Ultra-low power Wi-Fi wireless connectivity enabling battery life extending close to sensor device life is required to meet the challenging needs of today’s deployment with lowest TCO (total cost of ownership). Sensor to Cloud end-to-end Wi-Fi connectivity architecture which includes both platform level power management optimizations and higher performance are key to achieving always on cloud connected sensor emerging use-cases. Innophase IOT is focused on delivering to the promise of battery-operated Cloud connected IOT Sensor solution with its highly innovative platform level approach. – Learn more about Nuvoton IoT Security platform: https://www.nuvoton.com/iotsecurity Shop online: https://direct.nuvoton.com/ Contact us: SalesSupport@nuvoton.com #seminar #en #general #Application #M2354 #M2351 #Nuvoton #新唐科技 #NuMicro #MCU

This video will introduce NuMaker-HMI-MA35D1-S1 Quick Start to you. 1. Unboxing 2. Power On and Demonstration 3. NuMaker-HMI-MA35D1-S1 Introduction 4. Development Platform 5. Development Environment Setup #HMI #SoM #System-on-Module #Yocto #DevelopmentBoard #Product #general #en #learning - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

This video will introduce a BMS reference design based on the Nuvoton NuMicro® M453 series microcontroller and the battery monitoring IC KA49517A/522A series. #BMS #Cortex-M4 #M453 #M483 #KA49517A #KA49522A #Embedded World 2022 #Learning #en #basic #application - - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

IoT Security Services: Create Value with Security by Design and Security Lifecycle Management Yan-Tarō Clochard Chief Marketing Officer (CMO) and Sales VP North Asia, Secure-IC The prerequisite for robust and sustainable security is to generalize IoT/OT security by design, natively from the chip, and to manage it throughout the lifecycle of the connected device. Secure-IC will present the importance of proven cybersecurity and certification compliance through security evaluation services, as well as process and means to address security lifecycle management issues. Learn more about Nuvoton IoT Security platform: https://www.nuvoton.com/iotsecurity Shop online: https://direct.nuvoton.com/ Contact us: SalesSupport@nuvoton.com

嗨我是新唐 FAE Ace 今天我要來介紹的電池管理的晶片，簡稱 BMIC 我們的 BMIC 有分成兩大類，一個是工業應用，第二個是車用 那我們這邊來介紹車用 我們的車用 BMIC 有三大訴求，一個是安全性，可擴展性以及耐久性 尤其是安全性，我們是使用車子的關係是有關於人身安全的 所以我們這部分一定有把持好 我們這邊有兩塊 BMIC 的板子 因為剛剛我的訴求有可擴展性，所以我們這邊有兩組 BMIC 的板子 可以各別控制兩組的電池串，那這塊就是 MCU MCU 接到我們電腦的人機介面去做一些控制 當然我們沒有以實際的電池去做模擬，以電阻來做個電池串的模擬狀況 然後我們可以從人機介面上，有各個電池組的電壓狀況 以上就是車用 BMIC 的介紹 - 【2021 Roadshow專區】 精彩內容：https://www.nuvoton.com/roadshow2021 點我購買：https://direct.nuvoton.com/roadshow2021/ - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw 聯絡我們：SalesSupport@nuvoton.com

Show how Nu-Link2-Pro uses ICP Programming Tool on PC to program ISP Bootloader to LDROM, and then use Nu-Link2-Pro Bridge I2C interface with ISP Programming Tool to upgrade the firmware of the target chip. #en #Tool #Training #Intermediate #Learning - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com

Hello everyone I am Chris, the Field Application Engineer from Nuvoton Technology. Today I will introduce the programming and debugging tool, called NuLink-Gang, and NuLink2-Pro. And I will show you in what kind of situation you can utilize the tools. During system development, Nuvoton provides three IDE interfaces: KEIL, IAR, and NuEclipse for user to develop source code. When programming the Chip, Nuvoton provides ICP programming Tool in PC and the debugger Nu-Link2-Pro for users to perform debugging and programming function. User who uses all of the Nuvoton Nu-Maker boards series can develop through the Nu-Link2-Me debugger and programmer; it’s attached to the board. During the mass-production stage, there are 2 modes for programming the target chip. One is online programming and the other is offline programming. At first, in online programming mode, user can use ICP programming Tool and a Nu-Link2-Pro to program a target chip. Besides, if it needs to program several chips at one times, the Nu-Link Command Tool supports program multiple develop board by several Nu-Link2-Pro. Nu-Link2-Pro also supports drag-and-drop Flash programming. User can intuitively complete the programming action. Nu-Link2-Pro In offline programming mode, user can pre-store the programming file in SPI flash, USB flash drive, or SD card. When user wants to program the target chip, pressing the programming button on Nu-Link2-Pro to complete the programming action. If it needs a large number of ICs to be programming, it recommends using the Nu-Link-Gang programmer. Nu-Link-Gang programmer can perform offline programming on four different chips at a time, significantly increasing the programming efficiency. Besides, Nu-Link-Gang programmer can also use the control bus to connect with an automatic programming machine for automatic programming. In the system upgrade, Nu-Link2-Pro also provides five standard communication interfaces such as SPI, I2C, UART, RS485, and CAN for transmission, which is convenient for users to upgrade the system. That’s all for the introduction of Nuvoton’s programming and debugging tool, NuLink-Gang, and NuLink2-Pro. Thank you for watching it. If you want to know more details, please contact us! Thank you. #Tool #Training #Learning #Intermediate #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/numaker-m251sd Contact us: SalesSupport@nuvoton.com

NuMaker-IoT-M487 (5) Connect to Pelion Device Management on Mbed OS Hello everyone, I am Morgan, the principal engineer of Nuvoton Technology. Today, I will show you how to connect to Pelion Device Management with Mbed OS on NuMaker-IoT-M487 development board. Because the demonstration needs to store certificate, a MicroSD card is required. Open Chrome browser, enter the URL https://cloud.mbed.com/quick-start If you didn’t use Pelion Device Management before, you need to activate your Mbed account to access Pelion. Click the “Activate your free access”. Then log in your Mbed account. Click “Activate Pelion Device Management account“… Select the “Start the Connect Tutorial” Then scroll down to select NuMaker-IoT-M487 (WiFi) --After selected, scroll down and click “Get started”-- If you have completed previous tutorial, the NuMaker-IoT-M487 board has been selected in your Mbed account. Please click the “2.2” to import the Pelion Connect Tutorial into your Online Compiler. It shows the import dialog box, please click Import. Wait for a moment while importing the sample code. Click “mbed-os-example-pelion” project name, Then click “Pelion Device Management” on menu bar, select “Manage Connect Certificates” in pull-down menu to create a Pelion certificate. You need to provide API key. You can create a new one here. Log in your mbed account. Accept Then click New API key Assign an API Key name Click Close After created an API key, back to online compiler, Then click Manage Connect Certificate again. API Key automatically filled here. Click OK. Click “Create”, then assign a name for the certificate. Click OK. Click the certificate just created to select it, then click OK. The online compiler will automatically update source code with the selected certificate. Click “Pelion Device Management” on menu bar again, select “Apply Update Certificate”. An “Update Certificates” dialog box appears. Create it. Click Download Private Key and save it. Please make sure that NuMaker-IoT-M487 board already selected in the upper right corner. If not, please refer Nuvoton IoT Tutorial series “Get Started with Mbed OS” which has a detailed description of how to add a board. In order to use Wi-Fi, you have to configure SSID and password to match your Wi-Fi access point setting. In the mbed_app.json file, the default Wi-Fi security set to WPA and WPA2 in “nsapi.default-wifi-security” field. Please modify the field “nsapi.default-wifi-ssid” to your Wi-Fi SSID Then modify “nsapi.default-wifi-password” to your Wi-Fi password. Click on “Compile” to build it. Have to wait for a while. Then you can see the last message is “Success!” at the bottom of this page. The browser will download the binary firmware file directly after a successful compiling. It will be saved in a default download folder or the folder based on your browser setting. In Chrome, you can click download file and select “Show in folder”. Then we connect the NuMaker-IoT-M487 USB port to your computer and make sure the onboard LED lights up. Let’s back to the download folder where you can see the binary firmware file (mbed-os-example-pelion.NUMAKER_IOT_M487.bin). Drag and drop the file to NuMicro MCU drive. You will see the copying progress dialog box. Please find the virtual COM port assigned for NuMaker-IoT-M487 in Device Manager. In the tutorial, the “Nu-Link Virtual Com Port” is COMx. Then use your terminal tool. Here we use Putty. Open the COMx port with 115200 baud rate, 8 bits, 1 stop bit, none parity, and no flow control settings. Then “Open” it. Press Reset button on board to run again. You can see the connection messages printed on terminal. It shows the board’s IP address obtained from the Wi-Fi access point, and the Endpoint Name. Then you can see the device resource in Pelion Device Management Portal. Log in Pelion Portal with the same Mbed account. Click Device directory. Find the device ID which should be registered state. Click the Device ID, it shows the Device details. Click RESOURCES, find the resource 3200/0/5501. Click the resource. Now, you can press keys in terminal to increase the counter. Or the counter automatically increase 1 by one second. The demo code also updates the counter to Pelion. You will see the value change in the graph. That’s all for this tutorial. Thank you for watching. Welcome to subscribe to our channel. If you want to know more information, please contact us at SalesSupport@nuvoton.com - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://direct.nuvoton.com/tw/numaker-iot-m487 Contact us: SalesSupport@nuvoton.com #tool #training #learning #intermediate #en

本短片介紹了可符合 AMI 2.0 國際標準的智慧電錶設計。該設計即將在一大型電力公司所服務的供電區域進行大規模部署。同時也透過手機APP演示了遠程線上自動讀錶的功能。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買管道：https://direct.nuvoton.com/tw/ 聯絡我們： SalesSupport@nuvoton.com

This short video clip introduces a real smart meter design in starting volume deployment in South Korea. A real meter machine and mobile phone APP show the auto meter reading online. #Application #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ contact us: SalesSupport@nuvoton.com