NuMaker-HMI-M487

{{langMap[menu2.item.id]}}{{menu2.item.count ? '(' + menu2.item.count + ')' : ''}}
- {{langMap[menu3.item.id]}}{{menu3.item.count ? '(' + menu3.item.count + ')' : ''}}
  - {{langMap[menu4.item.id]}}

NuMaker-HMI-M487

NuMaker-HMI-M487 is composed of NuMaker-PFM-M487 as the mainboard (bottom board) and NuMaker-M487-Advance as the daughterboard (upper board). It provides a wealth of resources for software and hardware development, including software BSP packages, circuit diagrams (schematic), PCB layout file, Gerber file, user manual, and BOM table.

The development platform of NuMaker-HMI-M487 uses the Nuvoton Microcontroller M480 series with Arm® Cortex®-M4 as the core, running at a maximum speed of 192 MHz, and supports high-speed SPI (96 MHz) interface to connect to external SPI Flash, which can quickly read HMI Displays the GUI image for applications and can store a maximum image data of 32 MB. Otherwise, the series of M480 supports an LCD screen with an SPI interface and provides EBI (16-bit) interface, which can support LCD interface requirements in i80 mode, and its resolution can reach up to 320 x 240.

Features of NuMaker-HMI-M487D Development Board

Up to 192 MHz Cortex-M4 with DSP/FPU, which embedded 512 KB Flash and 160 KB SRAM
On-board 4 MB SPI Flash and 1 MB SRAM
On-board 124 dB of SNR, stereo audio CODEC with a headphone output
On-board USB full speed OTG and USB high-speed OTG
On-board SD card slot
On-board 10/100 Mbps Ethernet ( RJ-45 )
On-board 3.4” ( 320x240 ) LCD panel, 16-bit i80-system
On-board six-axis ( gyro + accelerometer ) MEMS